Imron VG610 Spray Activator

AXALTA IMRON 610P ACTIVATOR – PART “B” ONLY For use with Imron 3.4 HG-C. Imron 3.4 HG-C high gloss clear aliphatic polyurethane enamel is a high-solids, two-package, VOC conforming product (3.4 lbs./gal.), producing properties of both polyester and acrylic polyurethanes. The resulting highly durable finish delivers industry leading polyurethane performance. Brush, roll or spray. Product is sold by the quart.

MIX RATIO: Thoroughly mix 3 parts Imron 3.4 HG-C Enamel (sold separately), then add 1 part Imron VG-610 Activator while stirring. No induction period is necessary. Normally 0-3% (1-4 oz.) reduction is adequate for spray application depending upon conditions and equipment. Maximum reduction should not exceed 3%. Use Axalta 68083 Thinner (sold separately). If faster recoat and handling is required, add up to 2 oz./gal. 389S Accelerator.

SHIPPING NOTE: Product is considered hazardous if shipping by air.

LINKS:

Axalta Imron VG610 Spray Activator – SDS